HAProxy

HAProxy, which stands for High Availability Proxy, is a popular open source software “TCP and HTTP” Load Balancer and proxying solution. It is available as a package on almost all linux distros. The configuration is located at /etc/haproxy/haproxy.cfg.

FRONTENDS

A frontend defines how requests should be forwarded to backends. Frontends are defined in the frontend section of the HAProxy configuration. Their definitions are composed of the following components:

  • a set of IP addresses and a port (e.g. 10.10.10.1, *:443)
  • ACLs
  • use_backend rules, which define which backends to use depending on which ACL conditions are matched, and/or a default_backend rule that handles every other case.

An example of a front-end :

frontend front_dc_pop3
bind        :1110
mode        tcp
default_backend     back_dc_pop3

This configures a frontend named front_dc_pop3, which handles all incoming traffic on port 1110. This will send all traffic to the backends defined by back_dc_pop3.

ACCESS CONTROL LISTS (ACL)

In relation to load balancing, ACLs are used to test some condition and perform an action (e.g. select a server, or block a request) based on the test result.

This is similar in concept to an if-else snippet where execution takes place based upon the success or failure of a particular block. Use of ACLs allows flexible network traffic forwarding based on a variety of factors like pattern-matching and the number of connections to a backend.

Example of an ACL:

acl url_stats path_beg /stats

This ACL is matched if the path of a request begins with /stats. This would match a request of http://10.10.10.1/stats, for example. Here, url_stats is just the label given to the pattern. For more details on ACL please refer to the official HAProxy documentation

BACKENDS

A backend is a set of servers that receives forwarded requests. Backends are defined in the backend section of the HAProxy configuration. In its most basic form, a backend can be defined by:

  • which load balance algorithm to use (mentioned below)
  • a list of servers and ports

A backend can contain one or many servers. Adding more servers to your backend will generally increase the both the reliability and load capacity of the configured service by distributing the load over multiple servers.

Here is an example of a two backend configurations, back_dc_pop3 and back_dc_lmtp with two servers in each, listening for pop3 and lmtp traffic respectively:

backend back_dc_pop3
mode        tcp
balance     leastconn
option      allbackups
server 10.41.1.131 10.41.1.131:110 check inter 5s
server 10.41.1.116 10.41.1.116:110 check inter 5s
backend back_dc_lmtp
mode tcp balance leastconn option allbackups server 10.41.1.131 10.41.1.131:24 check inter 5s server 10.41.1.116 10.41.1.116:24 check inter 5s

Note

Details about load balancing methods and options are available in the haproxy documentation if you need more information.

HEALTH CHECKING

HAProxy uses health checks to determine if a backend server is available to process requests. This avoids having to manually remove a server from the backend if it becomes unavailable. The default health check is to try to establish a TCP connection to the server i.e. it checks if the backend server is listening on the configured IP address and port.

SAMPLE CONFIGS

HAProxy configured between Dovecot Proxy and Dovecot Directors:

global
log         127.0.0.1 local4
chroot      /var/lib/haproxy
pidfile     /var/run/haproxy.pid
nbproc  4
cpu-map     1 0
cpu-map     2 1
cpu-map     3 2
cpu-map     4 3
maxconn     100000
user        haproxy
group       haproxy
daemon
stats socket /var/lib/haproxy/stats

defaults
balance     leastconn
log         global
option      tcplog
option      dontlognull
timeout connect 300000ms
timeout client 300000ms
timeout server 300000ms
maxconn     100000


frontend front_dc_pop3
bind        :1110
mode        tcp
default_backend     back_dc_pop3

frontend front_dc_lmtp
bind        :124
mode        tcp
default_backend     back_dc_lmtp

frontend front_dc_imap
bind        :1143
mode        tcp
default_backend     back_dc_imap

frontend front_dc_doveadm
bind        :12425
mode        tcp
default_backend     back_dc_doveadm


backend back_dc_pop3
mode        tcp
balance     leastconn
option      allbackups
server 10.41.1.131 10.41.1.131:110 check inter 5s
server 10.41.1.116 10.41.1.116:110 check inter 5s
server 10.41.1.127 10.41.1.127:110 check inter 5s
server 10.41.1.130 10.41.1.130:110 check inter 5s

backend back_dc_lmtp
mode        tcp
balance     leastconn
option      allbackups
server 10.41.1.131 10.41.1.131:24 check inter 5s
server 10.41.1.116 10.41.1.116:24 check inter 5s
server 10.41.1.127 10.41.1.127:24 check inter 5s
server 10.41.1.130 10.41.1.130:24 check inter 5s

backend back_dc_imap
mode        tcp
balance     leastconn
option      allbackups
server 10.41.1.131 10.41.1.131:143 check inter 5s
server 10.41.1.116 10.41.1.116:143 check inter 5s
server 10.41.1.127 10.41.1.127:143 check inter 5s
server 10.41.1.130 10.41.1.130:143 check inter 5s

backend back_dc_doveadm
mode        tcp
balance     leastconn
option      allbackups
server 10.41.1.131 10.41.1.131:2425 check inter 5s
server 10.41.1.116 10.41.1.116:2425 check inter 5s
server 10.41.1.127 10.41.1.127:2425 check inter 5s
server 10.41.1.130 10.41.1.130:2425 check inter 5s

HAProxy configured between Dovecot Backends and Scality sproxyd:

global
log         127.0.0.1 local2
chroot      /var/lib/haproxy
pidfile     /var/run/haproxy.pid
maxconn     60000
user        haproxy
group       haproxy
daemon
stats socket /var/lib/haproxy/stats

defaults
 mode                    http
log                     global
option                  httplog
option                  dontlognull
option http-server-close
option forwardfor       except 127.0.0.0/8
option                  redispatch
retries                 3
timeout http-request    1m
timeout queue           1m
timeout connect         10s
timeout client          1m
timeout server          1m
timeout http-keep-alive 10m
timeout check           10s
maxconn                 5000

frontend  scality_in
bind :::81
option forwardfor
option httplog
default_backend scality_ring

# Capture X-Dovecot-Reason, X-Dovecot-Username and X-Dovecot-Session-Id headers
capture request header X-Dovecot-Reason len 40
capture request header X-Dovecot-Username len 40
capture request header X-Dovecot-Session-Id len 70

backend scality_ring
balance roundrobin
mode http
option forwardfor
option httpchk
default-server inter 30s
server 10.10.10.1 10.10.10.1:81 check
server 10.10.10.2 10.10.10.2:81 check
server 10.10.10.3 10.10.10.3:81 check
server 10.10.10.4 10.10.10.4:81 check
server 10.10.10.5 10.10.10.5:81 check
server 10.10.10.6 10.10.10.6:81 check